We've tried everything we can to link the two with no results. Looking for a few tips to get this thing going. The controller uses Windows Mobile Version 5.0.…
If you are in search of a reputable leasing company for purchasing equipment or software, look no further than Rodney Blecha of Precision Leasing. Here you will find the leasing application.
Still won't connect to WMDC....looked under Active Sync in the windows programs and has this displayed... Windows PC Synchronized: 9/27/16 Attention requi…
<a href= http://twubs.com/trimble >#trimble</a>
My TSC2's Bluetooth won't stay on, does anyone have suggestions?
Please see the pictures in this post below before reading. Hello there guys. I have experience running an s3 total station, an s6, and various leicas like 4…
What could possibly cause the loss of field data from the TSC3 datalogger? Whenever I open the point manager window of the job,my pickups for a particular day…
Hello Fellow Surveyors, I am using a Trimble TSC2 data collector. The place where I work has a local coordinate system. When I create a new job: Coord Syst…
Hello Fellow Surveyors, Can anyone tell me how to set defaults so that Attributes entered in the field with codes are displayed along side Pt numbers in the N…
Trimble M3 Total Station User Manual
Hi all. I have a question about TBC- Trimble Business Center? Do you have to have the key to use this program? We have the TBC at work but it works if you i…
Are the S8 and Trimble Field Link compatable? Thanks
Hey guys, I'm trying to get my trimble style sheet to put my atribute before my code in the output. code= settlement plate condition -->only 8 differe…
Hello, Does any one know how to create a custom projection files on TSC2, I'm using the 12.22 version wich do not provide my grid in the Library, So I'm wonder…
I have a Trimble Robotic 5603 (internal 2.4GHz radio) I have tried to connect to TSC2 running Trimble SCS900 software and get incompatible radio error message.…
If you're looking for training manuals, guides or workflows for Trimble Business Center guides and Manuals, I found a TON of helpful documents on the UNLV webs…
In standard land survey of the sources and receivers lines we use GPS RTK correction and equipment. Do you think that using HP-Omnistar correction and equipmen…
DOES ANYBODY KNOW OF A INSTRUMENT REPAIR FACILITY THAT WILL WORK ON THESE? PREFERABLY IN S.C.. THE TRIMBLE PEOPLE DON'T SUPPORT IT ANYMORE. THEY WILL WORK ON T…
Hi, I am using SCS900 on a TSC3 with Advance measurement module activated. There was a function in total station setup where I can measure control network. Di…
just looking for some Zeiss Elta 50 users
If I carry out site calibration on with a TSC3 datalogger, HOW DO I COPY THE CALIBRATION FILE TO ANOTHER DATALOGGER( WHAT IS THE FILE EXTENSION OF THE CALIBRAT…
Hello, I'm trying to upgrade the SCS900 software on my ACU but it says that there's not enough memory. Any suggestions as to how I can free up around 18MB?…
to all, I have a Trimble Pro XT receiver and I cannot communicate to the device using a serial cable. I had the serial communication to the receiver working.…
Hello, I'm hoping someone here can help me with getting some old Trimble equipment to work, please? I'm not a professional surveyor, although was very many…
Our TSC2 now will not connect to the rover or the base station at all, (if you have been tracking the story we discontinued use of the bluetooth and connected…
Hi everyone, I´m doing some kind of experiment with an excel spreadsheet: 1-GPS ECEF adjusted coordinates converted to a local model based on height control po…
I'm using a Trimble XRS GPS with Terrasync 2.30 Pro. I would like to enter state plane coordinates into the hand held logger, and then use the navigation funct…
I've recently started using a trimble s8 total station and I'm having problems completing calibration steps. I can't understand the instruction in the manual f…
Hi, Can anybody tell me is Trimble 5503 Total Station working with auto lock using Remote Target 602 (Trimble)? Instrument has no radio on board, only servo. …
I am working with survey data collected with a Trimble Geo6000 series GPS unit and post-processed in Trimble GPS Pathfinder 5.4 and have encountered an issue w…
Hello Fellow Surveyors, Could someone please help me with this....I am setting up a survey enviroment in Civil 3D 2012 from field codes, symbols, description…
We've tried everything we can to link the two with no results. Looking for a few tips to get this thing going. The controller uses Windows Mobile Version 5.0.…
Did you know? (Service Tips) If your Trimble Geodimeter Series 600 or 5600 displays an Internal Memory Battery Expired message, the internal memory backup…
I would really like to be able to tap on a feature and have it tell me what it is, but that function does not exist in Terrasync I see. Has anyone have a solut…
I have a new HPB450 radio but I am unable to get it to connect to my receiver. Here's my setup: RTK Mobile Base Trimble TSCE controller (Survey Controller soft…
I have some data from our new Geo 6000. I can not correct the data properly. I have a GLONAS base station as a refrence but my data dose not look good, and my…
Has anyone else had the problem of converting a trimble job file on the TSC2 using survey controller software to a RW5 file when you have more then 5000 points…